(10kg minimum)Single Colors Sales 3D Printer Filament PLA/PLA+ Glossy Colorful 1.75mm 1kg/2.2lbs IWECOLOR
IWECOLOR release Official store and shop on Amazon only now and will public FB shop soon,make sure you are viewing the correct brand channels.
If you can't find your local warehouse,please select China then you could make it order,or just contact iwecolor team
IWECOLOR is formulated to offer minimal warping and little of no odor without heating the bed.
PLA+ is vacuum sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution eventually.
It is suitable for fast printing and printing large-sized models, if you have a project what asking stronger ,then PLA+ it's a best choice.
Print temp: 190°C - 220°C (374℉~ 428℉)
Heatbed temp: 50°C - 60°C (122℉~ 140℉)
Print speed: 30-90mm/s
Melt flow rate(g/10min, 190°C, 2.16KG): 3-5
- Environmentally Friendly and Non-toxic
- Premium Quality and High Precision
- Professional Vacuum-Sealed Packaging
- Less-tangle and Wide Compatibility
This PLA+ is made in-house by IWECOLOR . We chose Natureworks 4043D which is the best and most widely used in 3D printing.Although we test it each spool during manufacturing,but different 3D printer you need to take adjustment yourself to
1.75 mm filament is manufactured with precision of +- 0.03 mm
Before printing, please make sure the surface of heatbed is clean and your nozzle either
The recommended maximum temperatures of drying for IWECOLOR PLA are 50 °C for a minimum of 4 hours.
Green, Yellow, Red, Blue, Gold(mustard yellow), Purple, Black, White, Grey