3D Printer Filament Marble PLA Architectural Color 1.75mm 250g IWECOLOR


IWECOLOR release Official store and shop on Amazon only now and will public FB shop soon,make sure you are viewing the correct brand channels.

If you can't find your local warehouse,please select China then you could make it order,or just contact iwecolor team

Color: White Marble

White Marble
Green Marble

Spool: 250G


Warehouse: China


apple paygoogle paypaypalshopify payvisa
Availability : In Stock In Stock Out of stock

IWECOLOR is formulated to offer minimal warping and little of no odor without heating the bed.

About IWECOLOR PLA Marble Filament 
PLA Marble melts at a relatively higher little temperature of about 200 degrees Celsius while PLA is 190. Unlike regular PLA, "MARBLE" it means that is formulated with additives or pigments that create a marbled or stone-like effect in the printed object.

It is vacuum sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution eventually.

PLA Marble filament is a type of PLA filament that is designed to give a marbled or stone-like appearance to printed objects. The exact appearance can vary, ranging from subtle veins and patterns to more pronounced and dramatic marble effects.

PLA Marble retains the mechanical properties of regular PLA, including moderate toughness and rigidity.

Print temp: 200°C - 220°C (392℉~ 428℉)
Heatbed temp: 50°C - 60°C (122℉~ 140℉)
Print speed: 30-90mm/s

Basic Parameter 

Melt flow rate(g/10min, 190°C, 2.16KG): 3-5

  • Environmentally Friendly and Non-toxic
  • Premium Quality and High Precision
  • Professional Vacuum-Sealed Packaging
  • Less-tangle and Wide Compatibility

This PLA Marble is made in-house by IWECOLOR . We chose Natureworks 4043D and Luminy LX175 which are the most widely used in 3D printing.Although we test it each spool during manufacturing,but different 3D printer you need to take adjustment yourself to

1.75 mm filament is manufactured with precision of +- 0.03 mm

Before printing, please make sure the surface of heatbed is clean and your nozzle either

The recommended maximum temperatures of drying for IWECOLOR PLA are 50 °C for a minimum of 4 hours.

Additional Information

White Marble, Green Marble