Optional Mixed Colors 3D Printer Filament Standard PLA/PLA+ 1KG/2.2lbs IWECOLOR
IWECOLOR release Official store and shop on Amazon only now and will public FB shop soon,make sure you are viewing the correct brand channels.
If you can't find your local warehouse,please select China then you could make it order,or just contact iwecolor team
Description
IWECOLOR is formulated to offer minimal warping and little of no odor without heating the bed.
About IWECOLOR PLA+ Filament
PLA+ melts at a relatively higher little temperature of about 175 degrees Celsius while PLA is 190. Unlike regular PLA, "PLUS" it means that there are more inside and it need higher temp printing. PLA+ It’s a hard material more like ABS, super toughness/rigidity/ transparency and lustre.
PLA+ is vacuum sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution eventually.
It is suitable for fast printing and printing large-sized models, if you have a project what asking stronger ,then PLA+ it's a best choice.
PLA+ is vacuum sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution eventually.
It is suitable for fast printing and printing large-sized models, if you have a project what asking stronger ,then PLA+ it's a best choice.
About IWECOLOR PLA Filament
PLA melts at a relatively higher little temperature of about 175 degrees Celsius . Unlike thermoset materials, PLA can be heated excced its melting point multiple times with very little degradation.It’s a hard material, but that also means it’s somewhere brittle, and once it breaks, it likes to shatter at your model. Only PLA material is proven for 50 microns layer height.
However, PLA is not a perfect material and, just like other plastic, there are some disadvantages. The low melting temperature also means low-temperature resistance. Model start to lose mechanical strength at temperatures over 60 °C.
The combination easily absorb moisture and low-temperature resistance means that it’s not ideal for outdoor,although PLA has UV resistance,it can not be exposed under the sun directly a long time. Also, PLA is only soluble in chemicals like chloroform or hot benzene. So when connecting multiple pieces, you’re better only use glue simply.
Even though PLA is for food safe, we do not recommend repeatedly drinking or eating from your 3D prints. Because of the small fractures on the print surface, bacteria can build up in there over time. You can prevent this by applying a food-safe coating.
However, PLA is not a perfect material and, just like other plastic, there are some disadvantages. The low melting temperature also means low-temperature resistance. Model start to lose mechanical strength at temperatures over 60 °C.
The combination easily absorb moisture and low-temperature resistance means that it’s not ideal for outdoor,although PLA has UV resistance,it can not be exposed under the sun directly a long time. Also, PLA is only soluble in chemicals like chloroform or hot benzene. So when connecting multiple pieces, you’re better only use glue simply.
Even though PLA is for food safe, we do not recommend repeatedly drinking or eating from your 3D prints. Because of the small fractures on the print surface, bacteria can build up in there over time. You can prevent this by applying a food-safe coating.
It's more suitable for noobs and simple family models.
Setup
Print temp: 190°C - 210°C (374℉~ 410℉)
Hot bed temp: 25°C - 60°C (77℉~ 140℉)
Print speed: 30-90mm/s
Setup
Print temp: 190°C - 210°C (374℉~ 410℉)
Hot bed temp: 25°C - 60°C (77℉~ 140℉)
Print speed: 30-90mm/s
Basic Parameter
Melt flow rate(g/10min, 190°C, 2.16KG): 3-5
Packaging Included: 1 spool PLA filament in one box
Packaging Included: 1 spool PLA filament in one box
- Environmentally Friendly and Non-toxic
- Premium Quality and High Precision
- Professional Vacuum-Sealed Packaging
- Less-tangle and Wide Compatibility
Additional Information
| Color |
Green, Yellow, Red, Sky Blue, Black, White, Grey, Gold, Purple |
|---|---|
| Country |
UK, USA |
Optional Mixed Colors 3D Printer Filament Standard PLA/PLA+ 1KG/2.2lbs IWECOLOR
$28.50
Green / UK