3D Printer Filament PLA Temp Magic Green Yellow Temperature Variation 1.75mm 250g/0.55lbs IWECOLOR


IWECOLOR release Official store and shop on Amazon only now and will public FB shop soon,make sure you are viewing the correct brand channels.

If you can't find your local warehouse,please select China then you could make it order,or just contact iwecolor team

Color: Green To Yellow

Green To Yellow

Spool: 250G


Country: Global


apple paygoogle paypaypalshopify payvisa
Availability : In Stock In Stock Out of stock

IWECOLOR is formulated to offer minimal warping and little of no odor without heating the bed.

About IWECOLOR PLA Temp Magic Filament 
PLA Temp-Changing melts at a similar temperature of about 190 degrees Celsius as regular PLA. But unlike regular PLA, "TEMP MAGIC" it means that filament initially has a green color at room temperature. However, when the temperature exceeds a certain threshold (usually around 35 degrees Celsius), it transitions to a yellow color. The color change is reversible and can occur multiple times as the temperature fluctuates within the specified range.

Temp-Changing is vacuum sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution eventually.

PLA Temperature-Sensitive Changing filament is responsive to changes in temperature. When the ambient temperature exceeds the threshold, the color change occurs. 

Print temp: 190°C - 220°C (374℉~ 428℉)
Heatbed temp: 50°C - 60°C (122℉~ 140℉)
Print speed: 30-90mm/s

Basic Parameter 

Melt flow rate(g/10min, 190°C, 2.16KG): 3-5

  • Environmentally Friendly and Non-toxic
  • Premium Quality and High Precision
  • Professional Vacuum-Sealed Packaging
  • Less-tangle and Wide Compatibility

This PLA Temp Changing is made in-house by IWECOLOR . We chose Natureworks 4043D and Luminy LX175 which are the best and most widely used in 3D printing.Although we test it each spool during manufacturing,but different 3D printer you need to take adjustment yourself to

1.75 mm filament is manufactured with precision of +- 0.03 mm

Before printing, please make sure the surface of heatbed is clean and your nozzle either

The recommended maximum temperatures of drying for IWECOLOR PLA are 50 °C for a minimum of 4 hours.

Additional Information

Green To Yellow