3D Printer Filament PLA Silk Gradient Colors Mini Roll 1.75mm 250g/spool IWECOLOR


IWECOLOR release Official store and shop on Amazon only now and will public FB shop soon,make sure you are viewing the correct brand channels.

If you can't find your local warehouse,please select China then you could make it order,or just contact iwecolor team

Color: Red/Gold


Country: Global


apple paygoogle paypaypalshopify payvisa
Availability : In Stock In Stock Out of stock

IWECOLOR is formulated to offer minimal warping and little of no odor without heating the bed.

About IWECOLOR PLA+ Filament 
PLA+ melts at a relatively higher little temperature of about 175 degrees Celsius while PLA is 190. Unlike regular PLA, "PLUS" it means that there are more inside and it need higher temp printing. PLA+ It’s a hard material more like ABS, super toughness/rigidity/ transparency and lustre.

PLA+ is vacuum sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution eventually.

It is suitable for fast printing and printing large-sized models, if you have a project what asking stronger ,then PLA+ it's a best choice.

Print temp: 190°C - 220°C (374℉~ 428℉)
Heatbed temp: 50°C - 60°C (122℉~ 140℉)
Print speed: 30-90mm/s

Basic Parameter 

Melt flow rate(g/10min, 190°C, 2.16KG): 3-5

  • Environmentally Friendly and Non-toxic
  • Premium Quality and High Precision
  • Professional Vacuum-Sealed Packaging
  • Less-tangle and Wide Compatibility

This PLA+ is made in-house by IWECOLOR . We chose Natureworks 4043D which is the best and most widely used in 3D printing.Although we test it each spool during manufacturing,but different 3D printer you need to take adjustment yourself to

1.75 mm filament is manufactured with precision of +- 0.03 mm

Before printing, please make sure the surface of heatbed is clean and your nozzle either

The recommended maximum temperatures of drying for IWECOLOR PLA are 50 °C for a minimum of 4 hours.

Additional Information

Red/Gold, Blue/Silver, Blue/Green, Red/Brown